Spatial wire forms · 3–8 mm
CNC 3D Wire Bending Machine
Multi-axis forming for wire components that change direction in three-dimensional space. The suitable machine type depends on geometry, material, bend sequence and handling needs.
Send Your Product Drawing →Complex geometry
Form spatial parts in a controlled sequence.
3D wire bending is appropriate when the product cannot be described as a single flat profile. Tool access, rotation, collision risk and part support must be considered before selection.
- Frames, handles, brackets and spatial components
- Programmed feed, rotation and forming sequence
- Tooling and support based on part geometry
- Option to review compatible upstream and downstream steps
Send for fit review
- Dimensioned 3D drawing or complete sample
- Wire material, profile and diameter
- Critical dimensions and acceptance points
- Target output and handling requirements
Configuration
boundaries.
Machine type and axis arrangement are confirmed only after reviewing the part.
| Confirmed wire range | 3–8 mm |
|---|---|
| Primary process | Multi-axis feeding and three-dimensional wire forming |
| Typical product type | Spatial frames, handles, brackets and complex wire components |
| Configuration inputs | Geometry, material, diameter, bend sequence, tolerance and output |
| Customizable items | Tooling, support, machine working type and compatible automation modules |
Check the geometry before selecting.
Send a 3D drawing or sample with the required dimensions.