Form and join · 4–10 mm
Wire Bending & Welding System
A configured production system that connects compatible forming, positioning and joining steps. The exact sequence and welding method are selected around the approved wire product.
Send Your Product Drawing →Reduce unnecessary handling
Connect forming and joining where the product allows.
An integrated system can reduce separate transfers, but the right configuration depends on frame geometry, material, weld location, inspection method and required flexibility.
- Forming sequence planned around joint position
- Part transfer and locating reviewed as one process
- Resistance or TIG welding selected by application
- Trial sample and acceptance criteria agreed per project
Send for system review
- Complete product drawing and weld locations
- Wire material, profile and diameter
- Required joint and inspection criteria
- Target output and preferred automation level
Configuration
boundaries.
The combination is engineered per product; not every formed part should be welded in the same machine.
| Confirmed wire range | 4–10 mm |
|---|---|
| Primary process | Configured forming, positioning, transfer and welding |
| Typical product type | Wire frames, racks, supports and welded components |
| Configuration inputs | Geometry, material, weld location, joint requirement, inspection and output |
| Customizable items | Tooling, welding process, sequence, locating and compatible handling modules |
Check whether the processes should connect.
Send the complete frame drawing and marked weld positions.